Hello !
Well folks my first post, and with a solution!
I just report the solution to who what to run arcconf inside esxi and get the status of the Adaptec controller.
I use vmware 5.1 VMkernel vmware03.XXX.com 5.1.0 #1 SMP Release build-1065491 Mar 23 2013 10:12:46 x86_64 GNU/Linux
you need to pass the arcconf, libstdc++.so.5.0.7 (x64) to inside vmware box.
put the lib inside /lib64
make a ln -fs /lib64/libstdc++.so.5.0.7 to /lib64/libstdc++.so.5
Now arcconf will work Image may be NSFW.
Clik here to view.
./arcconf --help
| UCLI | Adaptec by PMC uniform command line interface
| UCLI | Version 7.31 (B18856)
| UCLI | (C) Adaptec by PMC 2003-2011
| UCLI | All Rights Reserved
now the good, part the arcconf search in /dev for /dev/aacX that will fail because don't exits, but the /dev/aac exists Image may be NSFW.
Clik here to view. so
ln -fs /dev/aac /dev/aac0
and put that line in: /etc/rc.local.d/local.sh
And now all will work Image may be NSFW.
Clik here to view.
~ # ./arcconf getconfig 1 al
Controllers found: 1
----------------------------------------------------------------------
Controller information
----------------------------------------------------------------------
Controller Status : Optimal
Channel description : SAS/SATA
Controller Model : Adaptec 2405
Controller Serial Number : 9D511144DF9
Physical Slot : 6
Temperature : 44 C/ 111 F (Normal)
Installed memory : 128 MB
Copyback : Disabled
Background consistency check : Disabled
Automatic Failover : Enabled
Global task priority : High
Performance Mode : Default/Dynamic
Stayawake period : Disabled
Spinup limit internal drives : 0
Spinup limit external drives : 0
Defunct disk drive count : 0
Logical devices/Failed/Degraded : 1/0/0
Statistics data collection mode : Enabled
--------------------------------------------------------
Controller Version Information
--------------------------------------------------------
BIOS : 5.2-0 (17380)
Firmware : 5.2-0 (17380)
Driver : 1.1-5 (2459)
Boot Flash : 5.2-0 (17380)
----------------------------------------------------------------------
Logical device information
----------------------------------------------------------------------
Logical device number 0
Logical device name : RAID1
RAID level : 1
Status of logical device : Optimal
Size : 953334 MB
Read-cache mode : Enabled
Write-cache mode : Enabled (write-back)
Write-cache setting : Enabled (write-back)
Partitioned : Yes
Protected by Hot-Spare : No
Bootable : Yes
Failed stripes : No
Power settings : Disabled
Now the script to make a warning, by mail, sms, console report it's required, make it work yourself Image may be NSFW.
Clik here to view.
Warning in a ESXI update the lib my gone, but the working was there.
This cmd: esxcfg-init -a "testing" write the text to event log as warning, if anyone know as to make it but as error say me Image may be NSFW.
Clik here to view.
Regards
VS aka OpenSys